Optimum | Clay Towel

Optimum | Clay Towel


The Opti Clay Fine Blue Towel maintains a clean & smooth surface!  An evolution of the clay bar!

  • Before waxing, buffing, and polishing

  • Truly cleans & smooths the finish

  • Increases gloss, depth, and shine

  • Helps wax & sealants last longer

You can wash, clay and wax in one step by washing with Optimum No Rinse then apply 2 sprays of Optimum Car Wax per panel.  

Then use Opti Clay Fine Blue Towel to remove surface contaminants.

Use Microfiber Drying Towel to dry the car.


1. Wash vehicle to remove loose dirt and debris.

2. Spray Optimum No Rinse (2oz to 1gal) on a small section of the vehicle. (Alternatively, you can use Optimum Instant Detailer or Car Wax.)

3. Gently rub Opti Clay Fine Blue Towel over the lubricated area until contaminants are removed and surface is smooth. Wipe area with an Optimum Microfiber Drying Towel. Continue in sections until vehicle is fully decontaminated.

4. Follow with Optimum Car WaxOptimum Polish, or Opti-Seal.

Prior to initial use rub Opti Clay Fine Blue Towel on glass using clay lubricant. Inspect surface of Opti Clay Fine Blue Towel before and during use. To clean the clay surface, spray clay surface with lubricant and wipe gently with hand. After repeated use, or if too much contamination is present, discard and use a new Opti Clay Fine Blue Towel.

  •  Do not soak in liquid

  • Do not squeeze or wring out

  • Do not store laying flat on clay media surface

  • Do not store wet in air tight containers

Add To Cart